TOPCON NET-G5 GNSS Receiver

SKU: 1005788-02

Leave your feedback

297 030 грн

Quick order

TOPCON NET-G5 GNSS Reference Receiver

The NET-G5 is a GNSS reference receiver for many types of applications among other GNSS infrastructure network receivers, permanent reference stations, field (mobile) base stations and reference stations for scientific analysis.

The NET-G5 uses Topcon’s premium Vanguard and Universal Tracking Channel technologies, incorporating 452 channels capable of tracking multi-frequency signals from all GNSS constellations including GPS, GLONASS, SBAS, QZSS, Galileo and BeiDou. This includes current and modernized signals across the full GNSS spectrum, including multiple L-band signals. The integrated Vanguard Technology™ has also demonstrated successful tracking and demodulation of advanced QZSS signal structures such as the LEX signal in E6.

The NET-G5 receiver can be accessed via Ethernet, Wi-Fi, or Bluetooth® as well as by using standard serial or USB connections. The NET-G5 can serve as a USB Host and provides a webbased user interface offering flexible configuration options and portability. The USB Host allows the user to connect a USB memory stick or USB Mass Storage Device (UMS) to the NET-G5 receiver.

Satellite systems	🛰️GPS+GLO+GAL+BDS
Tracking channels	452
Tracking channels type	Universal - TOPCON patented technology
GPS signals	L1 C/A, L1C, L1P(Y), L2P(Y), L2C, L5
GLONASS signals	L1 C/A, L1P, L2C/A, L2P, L3C
GALILEO signals	E1, E5a, E5b, E5 AltBOC, E6
BEIDOU Signal	B1, B2, B3
SBAS signals	(WAAS/EGNOS/MSAS) L1
L-band signals	1525-1560 МHz
Additional signals	QZSS: L1 C/A, L1C, L2C, L5; IRNSS: SPS-L5
Built-in GNSS antenna	Not supported
External GNSS antenna	External connection is possible
Accuracy High-precision static Under nominal observing conditions and stringent processing methods, including the use of dual-frequency GPS, accurate ephemeris, quiet ionospheric conditions, approved antenna calibration, unobstructed visibility greater than 10 degrees, and an observing duration of at least 3 hours (depending on the length of the baseline)	H: 3.0 mm + 0.1 ppm x D / V: 3.5 mm + 0.4 ppm x D
Accuracy Static and Quick static	H: 3.0 mm + 0.4 ppm x D / V: 5.0 mm + 0.5 ppm x D
Accuracy RTK, Stop&Go, NRTK	H: 8 mm + 1.0 ppm / V: 15 mm + 1.0 ppm
Tilt compensation	No
Serial port	2 x RS-232 Serial Port, 1 x RS-422 Serial Port
USB	1 x USB Type-B Device Mode, 1 x USB Type-A
Radio modem	External
Cellular modem	3G 1xSIM
Bluetooth	v2.1 + EDR
LongLINK™ LongLink™ technology provides independent communication between TOPCON receivers. One Base Receiver can simultaneously provide correction to three Rovers	No
Wi-Fi	Yes
Built-in memory	8 GB
Data recording	Support 16 simultaneous recording sessions
Data recording format	TPS, RINEX
Data output format	RTCM SC104 2.x, RTCM 3.x, RTCM 3.X MSM3, CMR/CMR+, TPS
Position update rate	Up to 100Hz
Network solutions	VRS, MAC, FKP
MINTER	4 external LEDs
External control	Mobile devices, controllers and tablets based on Windows, Android or iOS
Resistance to random vibrations	MIL-STD 810G, Method 514.6, Broad band noise (random vibration), along each of 3 axes, Category 4, table 514.6C-IV
Resistance to sinusoidal vibration	There is no data
Resistance to shock	MIL-STD 810G, Method 516.5. Table 516.5-I Alternate Test Method of Classic Pulse; 40g, 11ms duration
Pole drop	Not supported
Built-in power	Li-ion 2S x 4P, 7.2v, 1200 mAh
External power	9 to 27 VDC
Operating time	Up to 10 hours
Charging time	Up to 5 hours
Ingress Protection	IP67
Operating temperatures	-20ºC to +61ºC (with internal batteries), -40ºC to +80ºC (without internal batteries)
Storage temperatures	-40°C to +70°C
Instrument dimensions	150 X 60 X 200 mm
Instrument weight	1.90 kg
Manufacturer's warranty	12 months
Producing country	USA

		Quantity	Out of stock
	Sign in to apply your personal discount
Total 0 грн Proceed to checkout